Bridge; Ridge Port Parameters - 3Com 4007 Command Reference Manual

7
B P
RIDGE
This chapter provides key information about the commands that related
to managing bridge port features. With the commands in this chapter,
you can:
Display summary and detail information about bridge ports
Set per-port rate limits for broadcast and multicast traffic
Modify default STP settings on specific ports
Enable GVRP on specific ports
Find, remove, and add entries to the bridge address table
This chapter covers bridge port menu options only. For information
about other bridge menu options, use the Table of Contents to find the
appropriate chapter in this Command Reference Guide.
For more information about configuring bridge ports in your network,
see the Switch 4007 Implementation Guide.
The Switch 4007 software and management interfaces are built from
CoreBuilder ® 9000 switch technology. In Switch 4007 software
releases 3.0.0 and 3.0.5, the prompts and displays in all interfaces may
indicate this heritage.
P
ORT ARAMETERS