3Com 4007 Command Reference Manual page 531

Prompt Description
Service level Service level for the
conforming packets.
Drop causes the module
to drop all traffic on all
ports that are associated
with the classifier/control.
Loss eligible Whether conforming
packets are loss-eligible. A
loss-eligible packet can be
dropped if the transmit
queue for which it is
destined exceeds its
threshold.
Excess packets For receivePort or
service aggregate rate limit types,
service level for excess
packet.
Excess loss For receivePort or
eligible aggregate rate limit types,
whether excess packets
are loss-eligible.
How rate limit For receivePort or
is expressed aggregate rate limit types,
format of the rate limit.
Rate limit value For receivePort or
aggregate rate limit types,
number of Kbytes/sec or a
percentage.
0 makes all packets excess
packets.
Burst size For receivePort or
aggregate rate limit types,
maximum amount of data
(in Kbytes) that you can
transmit at the line rate
before the transmission is
policed.
Possible Values [Default]
For a rate Current service
limit of level
receivePort or
aggregate:
high, best
(best effort),
or low
For a rate
limit of none:
high, best,
low, or drop
y (yes) Current value
n (no)
high Current value
best
low
drop
y (yes) Current value
n (no)
KBytes/sec KBytes/sec
percentage
0 – 65434 –
KBytes/sec
0 – 100
percent
16 – 8192 Determined by
KBytes your specified rate
limit
531