Ip Ospf Neighbors Display - 3Com 4007 Command Reference Manual

386 C 15: O
HAPTER PEN
ip ospf neighbors
display
Layer 2
Switching
Modules
Multilayer
Switching
Modules
S P F (OSPF)
HORTEST ATH IRST
Displays information about currently defined neighbors in an OSPF area.
Valid Minimum Abbreviation
ip o n d
Fields in the IP OSPF Neighbors Display
Field Description
Flags Neighbor identification flags:
Example: [S, BDR] + [D, DR] is a static neighboring backup
designated router and a dynamic neighboring designated router
Indx Interface index that corresponds to the interface to which a
neighbor belongs
Neighbor Addr Interface address of neighbor
Pri Neighbor's OSPF router priority
ReqQ Number of LSAs being requested from neighbor
Router ID Neighbor's OSPF router ID
RxQ Number of LSAs in local retransmit queue to the neighbor
State Neighbor's adjacency:
SumQ Number of LSAs in LSA summary queue for the neighbor
D — Dynamic neighbor
S — Static neighbor
BDR — Backup designated router
DR — Designated router
Down — No recent data received from neighbor, connection
is down.
Attempt — Only used on nonbroadcast networks. No recent
data received from neighbor (will attempt to contact).
Init — Have recently seen Hello packet from neighbor;
however, two-way communication has not been established.
Two-way — Bidirectional communication has been
established.
ExStart — Taking initial step to create adjacency between
neighboring routers.
Exchange — Database descriptions are being exchanged.
Loading — LSA databases are being exchanged.
Full — Neighboring routers are fully adjacent.