Ip Interface Detail - 3Com 4007 Command Reference Manual

228 C 12: I
HAPTER NTERNET

ip interface detail

Layer 2
Switching
Modules
Multilayer
Switching
Modules
P (IP)
ROTOCOL
Displays detailed information about the specified interfaces or all
interfaces on a Multilayer Switching Module.
Valid Minimum Abbreviation
ip i det
Important Consideration
When you enter the command, you are prompted for an interface
index number even if you have only one interface defined.
Options
Prompt Description
Interface index Index number of the
IP interface whose
summary
information you
want to display
Fields in the IP Interface Detail Display
Field
ARP proxy
Broadcast address
Directed broadcast
ICMP redirect
ICMP router discovery
Index
IP address
Preference
Possible Values
One or more
configured indexes
all
? (for a list of
selectable indexes)
Description
Whether ARP proxy is enabled or disabled for the
specified interface.
Broadcast address for the specified interface.
Whether the forwarding of a directed broadcast (all 1s
in the host portion of the address) is enabled or
disabled for the specified interface. (A directed
broadcast is a packet that is sent to a specific network
or series of networks.)
Whether ICMP redirect is enabled or disabled for the
specified interface.
Whether the ICMP Router Discovery is enabled or
disabled for the specified interface
Index number that is associated with the interface.
IP address of the interface, chosen from the range of
addresses that the central agency assigned to your
organization.
Whether there is a preference being used for the
specified interface. If ICMP router discovery is enabled,
the module uses the routing interface with the highest
preference level.
[Default]
–