Bridge Spanningtree Stphellotime - 3Com 4007 Command Reference Manual

bridge spanningTree
stpHelloTime
Layer 2
Switching
Modules
Multilayer
Switching
Modules
Sets the time between configuration messages that the bridge generates
if it is operating as the root bridge. The current value is shown in the
bridgeHelloTime field of the
Valid Minimum Abbreviation
b sp stph
Important Considerations
If the probability of losing configuration messages is high, shorten the
time to make the protocol more robust.
If the probability of losing configuration messages is low, lengthen the
time to lower the overhead of the algorithm.
The recommended Hello time is 2 seconds.
Although the possible range for stpHelloTime is 1 – 10, the available
range is constrained by the following inequality:
stpMaxAge >= 2 x (stpHelloTime + 1 second)
Options
Prompt Description
STP hello time Time (in seconds) between
configuration messages from
the root bridge

bridge spanningTree stpHelloTime

.
bridge display
Possible Values [Default]
1 – 10 seconds
113
2 (factory
default), or
current value