Module Nvdata Reset - 3Com 4007 Command Reference Manual

62 C 3: M
HAPTER ODULE

module nvData reset

Layer 2
Switching
Modules
Multilayer
Switching
Modules
E
NVIRONMENT
Resets the module's nonvolatile (NV) data values to the factory defaults.
Valid Minimum Abbreviation
mo nv res
Important Considerations
At times you may want to reset the values to the factory defaults so
that you can reconfigure the module from its original settings.
Resetting the NV data means that all NV memory is set back to the
factory defaults. Before you proceed, be sure that you want to reset
your NV data. Because a module reboot is required, also be aware that
this action returns you to Management Module CLI prompt.
Prompts
Prompt Description
Do you Confirmation prompt.
wish to Resetting nonvolatile data may
continue? leave the module in an
inconsistent state; a reboot is
necessary after each reset.
Possible Values [Default]
n (no) y
y (yes)