Bridge Packetfilter Portgroup Create - 3Com 4007 Command Reference Manual

bridge packetFilter
portGroup create
Layer 2
Switching
Modules
Multilayer
Switching
Modules
Creates a packet filter port group on a Multilayer Switching Module.
Valid Minimum Abbreviation
b pa p c
Important Considerations
You can create up to 32 port groups, one for each bit in the 32-bit
port group mask.
The
portGroup create
associations. You must create and assign a filter to a port group to
affect filtering. See "bridge packetFilter create portGroup" and
"bridge packetFilter assign" earlier in this chapter.
Possible values for bridge ports (n) depend on the number of bridge
ports on the module.
Options
Prompt Description
Select port Mask that you want to assign
group mask to the port group
Select port Name of the port group that
group name you want to create
Use quotation marks around
any string with embedded
spaces. Use "" to enter an
empty string
Select Number of the bridge port that
bridge port you want to add to the new
group
Bridge Packet Filter Port Group Create Example
CB9000@slot6.1 [12-E-FEN-TX-L3](bridge/packetFilter/
portGroup): create
Select port group mask {1-32|?}: 15
Select port group name {?}[]: Marketing
Port Group 1 - Marketing - has been created
Select bridge port(s) (1-6|all|?): 1,3,4
command only creates port group
Possible Values
1 – 32
? (for a list of
masks)
Up to 32
alphanumeric
characters
? (for name criteria)
1 – n
all
? (for a list of valid
ports)
219
[Default]
–
–
–