Bridge Link Modify - 3Com 4007 Command Reference Manual

bridge link modify

Layer 2
Switching
Modules
Multilayer
Switching
Modules
Modifies the link name, as well as the main port and standby port, of an
existing resilient link pair on a Layer 2 Switching Module.
Valid Minimum Abbreviation
b l m
Important Considerations
Connect the network cable to the resilient link port after you reboot
the module.
In general, create links before you define your Virtual LANs (VLANs). If
you plan to create resilient links for part of a VLAN, create the resilient
links before you create the VLAN. When you create a resilient link that
includes ports that are part of a VLAN, those ports are removed from
the VLAN. You must modify the VLAN and add the new bridge port to
the appropriate VLAN. This situation does not apply to the default
VLAN (all ports are part of the default VLAN).
If you have already defined other links or trunks on your module, you
cannot select ports that are part of an existing link or a trunk.
You must reboot the module at the end of the link definition process.
(You can define multiple links in one
The resilient link port pair uses a single MAC address for frames
sourced by this pair.
The resilient link name can be up to 32 alphanumeric characters.
bridge link define
171
operation.)