Analyzer Remove - 3Com 4007 Command Reference Manual

558 C 19: R
HAPTER OVING

analyzer remove

Layer 2
Switching
Modules
Multilayer
Switching
Modules
A
NALYSIS
Restores the port to be a regular bridge port. Also restores the Spanning
Tree state to its state before the port was configured as an analyzer port.
Valid Minimum Abbreviation
an r
Important Considerations
Use this command when you no longer need the bridge port for the
analyzer.
The analyzer port can not be removed if it still has monitor ports.
The port becomes a member of the default virtual LAN (VLAN) when it
is restored (when you remove it as an analyzer port).
The port will not be automatically restored to any VLAN it might have
been a member of before it was configured as an analyzer port — you
must do this yourself.
Options
Prompt Description
Bridge port Number of the bridge port to
which the analyzer is attached
Possible Values [Default]
A valid bridge port –
number
? (for a list of
available bridge
ports)