Chapter 2 - Start-Up Instructions
DCS 600 and DCF 600 by FEXlink
Hardware
DCS 600
DCF 601/
DCF 602
Configuration For first field exciter
Associated publications
DCS 600
Software settings
DCS 600
DCF 601/
DCF 602
Note: Resetting of DCF 600 with FEXlink control (X16) is performed by switching OFF
(DISABLE reference) and ON (ENABLE reference) again:
Control Panel key
2 - 34
IV F
SDCS-AMC-DC or AMC-DC Classic board
SDCS-AMC-DC or AMC-DC Classic board
DCS 600 without SDCS-FEX-1 / SDCS-FEX-2
DCF 600 connection by FEXlink (X16)
Maincontactor of DCF 600 controlled by armature converter (FEXlink X16)
DI1 = H ⇒ connected to 48V
DCF 600
DI2 = H ⇒ connected to DCF 506
Technical Data
Software Description
Database
Parameter
Parameter
Parameter
Parameter
Parameter
Parameter
Parameter
(when in LOCAL mode)
3ADW000054R0301
3ADW000076R0401
GLOBAL\DEIND\DEIND051.NSF
41.03
=
15.16
=
15.21
=
15.22
=
46.07
=
43.13
=
99.03
=
⇒
Control Panel key
ABB Lampertheim
ABB Lampertheim
Rated field current
(only used for display)
5
operation mode
1
Node = First field exciter
2
FEXlink command
3
FEXLINK
4 or higher
Rated field current of
the motor
(when in LOCAL mode)
DCS 600 Operating Instructions