Parameter Selecting And Changing Of Value - ABB DCS 600 MultiDrive Operating Instructions Manual

Chapter 3 - Handling of Control Panel CDP 312

3.4 Parameter Selecting and Changing of Value

3 - 6
IV F
For Parameter selection with the CDP 312 the following applies:
• Ignore the two right-hand digits; the remaining digits are the
Group and are selected at the panel using keys
• The two right-hand digits are the Index and are selected at the
panel, using the keys
Parameter
13.01
1.26
Step Function
1. To enter the Parameter Mode
Selection
2. To select another group.
While pressing the key down,
only the Group number and
name is displayed. When the
key is released, number, name
and value of the first parameter
in the Group are displayed.
/ , e.g.:
⇒
Group
⇒
13
⇒
1
Press key
Table to be continued!
DCS 600 Operating Instructions
/ .
Index
01 (resp. 1)
26
Display after key is
pressed
È'ÈTÈÈÈÈÈ&$&È’‡ÈÈ&&
')ÈQ%WÈaGbbQVIaÈ
&'ÈCVÈQVÈbCEPÈPQÈdCT
PAR
È)&&&&
È'ÈTÈÈÈÈÈ&$&È’‡ÈÈ&&
('ÈabC`bÈ%ÈabWX
&)ÈTWECTÈabWXÈUWFG
È`CUXÈabWX