Fault History Display - ABB DCS 600 MultiDrive Operating Instructions Manual

Chapter 3 - Handling of Control Panel CDP 312

3.8 Fault History Display

3 - 10
IV F
Up to 24 faults are stored time related and displayed together with
the time they appeared after electronics supply switched on.
Step
1. To enter the Actual Signal
Display Mode
2. To enter the Fault History Dis-
play.
These keys also scroll the
screen from Actual Signal Dis-
play to Fault Display, to Fault
History Display back to Actual
Signal Display.
3.
To select newer (UP) or older
fault (DOWN).
4. To return to the Actual Signal
Display Mode.
Function Press key Display after key is
pressed
È'ÈTÈÈÈÈÈ&$&È’‡ÈÈ&&
TGFÈXCVGÈÈÈÈÈ&$&È
UWbW`ÈaXÈÈÈÈÈ&$&È’‡È
ACT
EWVdÈEc`ÈÈÈÈÈ&$&ÈCÈ
È'ÈTÈÈÈÈÈ&$&È’‡ÈÈ&&
È'ÈTCabÈHCcTbÈÈÈÈÈ
0'ÈVWÈUÈEWVb
bQUG6ÈÈÈ'0ÈPÈ))ÈUQVÈ
È'ÈTÈÈÈÈÈ&$&È’‡ÈÈ&&
È(ÈTCabÈeC`VQVIÈÈÈÈÈ
&(ÈGUG`ÈabWX
bQUG6ÈÈÈ'0ÈPÈ(5ÈUQVÈ
È'ÈTÈÈÈÈÈ&$&È’‡ÈÈ&&
TGFÈXCVGÈÈÈÈÈ&$&È
UWbW`ÈaXÈÈÈÈÈ&$&È’‡È
EWVdÈEc`ÈÈÈÈÈ&$&ÈCÈ
DCS 600 Operating Instructions