Honda WX15T Manual page 99

dummyhead dummyhead
MUFFLER
MUFFLER
MUFFLER
REMOVAL/INSTALLATION
The muffler becomes very hot during operation and
remains hot for a while after stopping the engine.
Touching a hot muffler will severely burn you.
Allow the muffler to cool before proceeding.
13-2
MUFFLER
INSTALLATION:
After removing any carbon deposits from the muffler, install
using a plastic hammer.
Do not tap on the muffler seal flange [1] or damage this part.
If the seal flange is dented or damaged, replace the muffler.
Check the cylinder exhaust port [2] for damage.
[1]
AIR GUIDE
SPARK ARRESTER BOLT (5 x 35 mm)
(Optional part)
CLEANING: page 3-7
[2]
5 mm SELF LOCK NUT (2)
SCREW (4 x 8 mm) (Optional part)
BOLT (5 x 16 mm) (3)
COLLAR (3)
MUFFLER
PROTECTOR