Honda WX15T Manual page 83

dummyhead dummyhead
CRANKCASE
CRANKCASE SIDE COVER
INSTALLATION
Wipe out oil from the crankcase side cover/cylinder
barrel [1] mating surface with a clean shop towel or a
degreasing cleaning agent.
Apply a liquid gasket (ThreeBond® 1206/1216E/1207B,
Hondabond 4, Hondabond HT or equivalent) [2] as an
even bead (1.5 – 2.0 mm (0.08 – 0.10 in)), centered
between the edges of the mating surface and bolt holes
in the cylinder barrel.
• Assemble within 3 minutes after applying the liquid
gasket.
Loosely tighten each bolt, then tighten to the specified
torque in the numbered sequence.
TORQUE: 7.3 N·m (0.75 kgf·m, 5.4 lbf·ft)
Wait for approximately 20 minutes after assembly
before filling oil and starting the engine.
11-8
[2]
[1]