Honda WX15T Manual page 96

dummyhead dummyhead
PUSH ROD RUNOUT
Check both ends of the push rod for wear.
Check the push rod for straightness.
If necessary, replace the push rod
VALVE ROCKER ARM SHAFT
JOURNAL I.D.
Measure and record each valve rocker arm shaft
journal I.D.
STANDARD: 4.000 – 4.018 mm (0.1575 – 0.1582 in)
SERVICE LIMIT: 4.050 mm (0.1594 in)
Replace the cylinder barrel if the measurement exceeds
the service limit
ROCKER ARM I.D.
Measure and record each rocker arm I.D.
STANDARD: 4.005 – 4.025 mm (0.1577 – 0.1585 in)
SERVICE LIMIT: 4.050 mm (0.1594 in)
Replace the rocker arm if the measurement exceeds
the service limit
ROCKER ARM SHAFT O.D.
Measure and record rocker arm shaft O.D.
STANDARD: 3.990 – 4.000 mm (0.1571 – 0.1575 in)
SERVICE LIMIT: 3.950 mm (0.1555 in)
If the measurement is less than the service limit,
replace the rocker arm shaft
(page 12-2).
(page 11-3).
(page 12-2).
(page 12-2).
CYLINDER HEAD
12-5