Engine Stop Switch/Oil Alert Unit Removal/Installation; Engine Stop Switch Removal/Installation - Honda WX15T Manual

dummyhead dummyhead
ENGINE STOP SWITCH/OIL ALERT
UNIT REMOVAL/INSTALLATION
IGNITION COIL LEAD
OIL LEVEL SWITCH LEAD
ENGINE STOP SWITCH
REMOVAL/INSTALLATION
• Remove the engine stop switch only if necessary for
engine
replacement.
Remove the stop switch bracket
Straighten the tab [1] of the engine stop switch [2] and
remove the engine stop switch.
Install the engine stop switch to the stop switch bracket
aligning its groove with the boss of the stop switch
bracket.
Bend the tab until it is fully seated on the stop switch
bracket so the engine stop switch is held.
• The tab is used for ground terminal.
Install the stop switch bracket
HARNESS CLIP
stop switch or stop switch
(page 7-5).
(page 7-5).
STOP SWITCH BRACKET
bracket
[2]
IGNITION SYSTEM
OIL ALERT UNIT
BOLT (6 x 8 mm)
ENGINE STOP SWITCH
[1]
Align
7-5