Oil Seal Replacement - Honda WX15T Manual

dummyhead dummyhead
CRANKCASE

OIL SEAL REPLACEMENT

CRANKCASE COVER
Clean the mating surface of the oil seal and the
crankcase cover using a clean shop towel or an
equivalent material.
Install the oil seal in the crankcase cover in the
specified position, using the special tools as shown.
TOOL:
Attachment, 24 x 26 mm [1]
Driver [2]
CRANKCASE SIDE COVER
Wipe the replacement oil seal clean, and wipe any oil
from the corresponding surface of the crankcase side
cover.
Place a clean shop towel or equivalent material under
the crankcase side cover before installing the oil seal.
Install the oil seal using the special tools as shown.
TOOL:
Attachment, 24 x 26 mm [1]
Driver [2]
11-16
07746-0010700
07749-0010000
07746-0010700
[2]
07749-0010000
[2]
2.0 - 2.5 mm
(0.08 - 0.10 in)
0.7 - 1.7 mm
(0.03 - 0.07 in)
[1]
[1]