Carburetor Inspection - Honda WX15T Manual

dummyhead dummyhead
FLOAT CHAMBER ASSEMBLY
Install the float chamber to the carburetor body at an
angle as shown.

CARBURETOR INSPECTION

FLOAT LEVEL HEIGHT
Place the carburetor in the position shown, and push in
the float with a finger.
Measure the distance (float height) between the float
top and carburetor body when the leg of the float just
starts to push the float valve.
TOOL:
Float level gauge [1]
FLOAT HEGHT: 12.0 mm (0.47 in)
If the float height is out of the specification, replace the
float (page
07401-0010000
5-6).
FUEL SYSTEM
ENGINE SIDE
10°
[1]
5-7