Honda WX15T Manual page 65

dummyhead dummyhead
STARTING SYSTEM
ASSEMBLY
The recoil spring is wound under high tension and
when released from the groove will cause sudden
unwinding.
Sudden unwinding can cause severe lacerations.
Wear gloves and eye protection during this
procedure and take care not to allow the spring to
come out.
Insert the hook [1] on the outer side of the spring into
the groove [2] inside the starter reel.
Pass the starter rope [1] through the starter reel, and tie
the rope so that it can be untied easily [2] by pulling it as
shown.
Wind the starter rope around the recoil starter reel [3] in
the direction of arrow.
Install the starter reel on the starter case so that the
spring inner hook [1] is hooked to the case tab [2].
8-4
[1]
[2]
[1]
[2]
[1]
[2]
[3]