Honda WX15T Manual page 72

dummyhead dummyhead
IMPELLER/CASING COVER
REMOVAL/INSTALLATION
Remove the volute case
ADJUSTER SHIM
(page 9-4).
CASING COVER
WASHER (6 mm) (4)
IMPELLER
REMOVAL:
Hold the flywheel [1] with a
commercially available strap wrench
[2], being careful not to damage the
magnet [3] part.
Remove the impeller.
[2]
[1]
RUBBER RING
/CERAMIC RING
BOLT (6 x 28 mm) (4)
INSTALLATION:
Hold the flywheel [1] with a commercially
available strap wrench [2], being careful not to
damage the magnet part [3].
Tighten the impeller to the specified torque.
7.0 N·m (0.71 kgf·m, 5.2 lbf·ft)
After installation, check the impeller clearance:
(page 3-10)
[3]
PUMP
[2]
[1]
[3]
9-5