dummyhead
dummyhead
RECOIL STARTER
DISASSEMBLY/ASSEMBLY
The recoil spring is wound under high tension and
when released from the groove will cause sudden
unwinding.
Sudden unwinding can cause severe lacerations.
Wear gloves and eye protection during this
procedure and take care not to allow the spring to
come out.
DISASSEMBLY
Remove the recoil starter
SWING ARM COLLAR
FRICTION SPRING
RECOIL STARTER SPRING
ASSEMBLY:
Set the hook on the outer side of
the spring on the tab of the starter
case, and set the spring in the case
while turning the spring
counterclockwise.
RECOIL STARTER CASE
(page
8-2).
STARTING SYSTEM
RECOIL STARTER SET SCREW
SWING ARM
RECOIL STARTER REEL
RECOIL STARTER KNOB
RECOIL STARTER ROPE
ASSEMBLY:
Check the rope for fraying or
wear before installation.
8-3