dummyhead
dummyhead
TROUBLESHOOTING
BEFORE TROUBLESHOOTING
TROUBLESHOOTING
• Check that the connectors are connected securely.
• Check for sufficient fresh fuel in the fuel tank.
• Read the circuit tester's operation instructions carefully, and observe the instructions during inspection.
ENGINE TROUBLESHOOTING
ENGINE LOCKED UP
Remove the pump case and volute case, and
check the pump condition.
Not jammed
Remove the spark plug and check for water or oil
in the combustion chamber.
Normal
Remove the recoil starter
(page 8-2)
whether the engine cranks.
Cranks
(page 8-3)
Inspect the recoil starter
4-2
Jammed
Abnormal
and check
Cannot be cranked
.
Abnormal
Remove any foreign materials.
sure the right strainer is being used.
Disassemble the cylinder head and replace the
faulty part(s)
(page 12-2)
.
Disassemble the cylinder barrel and replace the
faulty part(s)
(page 11-3)
.
Replace the faulty part(s).
(page 9-4)
. Make