dummyhead
dummyhead
IGNITION SYSTEM
IGNITION COIL INSPECTION
PRIMARY SIDE
Attach one lead of the tester to the lead terminal and
another tester lead to the iron core, and measure the
primary resistance of the ignition coil.
RESISTANCE: 0.99 – 1.21 Ω
SECONDARY SIDE
Attach one lead of the tester to the terminal inside the
spark plug cap and another lead to the iron core, and
measure the secondary resistance of the ignition coil.
RESISTANCE: 8.1 – 9.9 Ω
ENGINE STOP SWITCH INSPECTION
Attach the tester leads to the black lead [1] and the
ground plate [2] of the engine stop switch, and check for
continuity.
Switch position
If the correct continuity is not obtained, replace the
engine stop switch
7-8
Continuity
ON
OFF
Yes
(page
7-5).
No
[2]
[1]