Oil Level Switch Removal/Installation; Oil Level Switch Inspection - Honda WX15T Manual

dummyhead dummyhead
IGNITION SYSTEM
OIL LEVEL SWITCH
REMOVAL/INSTALLATION
Remove the following:
– Fan cover
– Ignition coil
OIL LEVEL SWITCH
BOLT (5 x 14 mm) (3)

OIL LEVEL SWITCH INSPECTION

Remove the oil level switch
Check for continuity between the oil level switch yellow
lead [1] and the ground terminal (green lead) [2].
– The oil level switch is normal if there is no continuity
with the switch set upside down.
– There must be continuity between the leads with the
switch in its normal position.
Suspend the switch in it's normal position in a container
filled with oil and check the float operation. The switch
is normal if there is continuity between the leads
initially, and no continuity when the switch is soaked in
the oil.
7-6
(page 8-2)
(page 7-3)
(page 7-6).
O-RING
[2]
[1]