Bosch DS7200V2-UK Installer's Manual page 126

Event as shown
Event #
in Panel Log
37 Call for Service Service
Required
38 Cancel Alarm Burglary
Cancel
39 Cancel Fire Fire Cancel
40 CheckSum Fail Parameter
Checksum Fail
41 ChckSum Parameter
Fail,DBus Checksum Fail
42 Cls,All,+Dly,Tmr Automatic
Closing
43 Cls,All,+Dly,KS Closing
Keyswitch
44 Cls,All,+Dly, Remote
Closing
RPS
45 Cls,All,+Dly,Tel Remote
Closing
46 Cls,All,+Dly,Usr Closing Report ri {area} CL {user}
47 Cls,All,-Dly,RPS Remote
Closing
48 Cls,All,-Dly,Usr Closing Report ri {area} CL {user}
49 Cls,Prt,+Dly,Tmr Automatic
Closing
50 Cls,Prt,+Dly,KS Closing
Keyswitch
51 Cls,Prt,+Dly, Remote
Closing
RPS
52 Cls,Prt,+Dly,Usr Closing Report ri {area} CL {user}
53 Cls,Prt,-Dly, Remote
Closing
RPS
54 Cls,Prt,-Dly,Usr Closing Report ri {area} CL {user}
55 Frc,All,+Dly,Tmr Forced Closing ai {252} CF {area}
56 Frc,All,+Dly,KS Forced Closing ss {255} CF {area}
Page 126 P/N: 4998152533-02
PART V: REFRENCE MATERIALS
SIA Report SIA Report Data
YX
ri {area} BC {user}
ri {area} FC {user}
YF
pi {SDI address} YF 330 System
ai {252} CA {area}
ss {255} CS {area}
ri {area} CQ {254}
ri {area} CQ {253}
ri {area} CQ {254}
ri {area} CA {252}
ss {255} CS {area}
ri {area} CQ {254}
ri {area} CQ {254}
Table 47: Control Panel Events and Reporting Formats (continued)
Copyright  2007 Bosch Security Systems, Inc.
Contact ID Report Event Description
616 Service This report sent
Request automatically at Call for
Service Interval. It does not
indicate a trouble condition.
406 Cancel User acknowledged active
alarm before Bell Time
expired, non-fire zone
types.
406 Cancel User acknowledged active
alarm before Bell Time
expired, fire zone types.
303 RAM Checksum on panel's
Checksum Bad parameters failed. Panel
program should be verified.
Checksum on Option Bus
Peripheral trouble device parameters failed.
Device should be checked.
403 Automatic O/C System turned All On with
Entry/Exit Delay by Sked
(Timer).
409 Keyswitch O/C System turned All On with
Entry/Exit Delay by
Keyswitch.
400 Open/Close System turned All On with
Entry/Exit Delay by RPS.
407 Remote System turned All On with
Arm/Disarm Entry/Exit Delay by
Telephone.
401 O/C by User System turned All On with
Entry/Exit Delay by User.
400 Open/Close System turned All On with
no delay (instant) by RPS.
401 O/C by User System turned All On with
no delay (instant) by User.
456 Partial Arm System armed Perimeter
Only with Entry/Exit delay
by Sked (Timer).
442 Keyswitch System armed Perimeter
Armed Stay Only with Entry/Exit Delay
by Keyswitch.
456 Partial Arm System armed Perimeter
Only with Entry/Exit Delay
by RPS.
456 Partial Arm System armed Perimeter
Only with Entry/Exit Delay
by User.
456 Partial Arm System armed Perimeter
Only with no delay (instant)
by RPS.
456 Partial Arm System armed Perimeter
Only with no delay (instant)
by User.
403 Automatic O/C System forced All On with
Entry/Exit Delay by Sked
(Timer).
400 O/C System forced All On with
Entry/Exit Delay by
Keyswitch.
Zone Types RPS
Status
Linked to Event
Reports
Event Group
12 R
8
7
12 R
12 R
10
10
10
10
10
10
10
10
10
10
10
DS7200V2-UK Installer's Guide
S
S