Panel Flat Cable - Brother HL-J6000DW Service Manual

9.28 Panel Flat Cable

(1) Remove the three screws (TAPTITE CUP B M2.6x10).
(2) Release the fourteen Hooks and remove the Panel lower cover from the Panel
upper cover.
TAPTITE CUP B M2.6x10
Hooks
Hook
(3) Release the Lock of the Connector and remove the Panel flat cable from the LCD
PCB.
(4) < 3.7 inch LCD model only >
Pull out the Panel flat cable from the LCD frame sheet.
LCD PCB
TAPTITE CUP B M2.6x10
Hook
Hooks
Fig. 3-92
Panel flat cable
Fig. 3-93
Panel lower cover
Hook
Hooks
Hook
Hook
Panel upper cover
LCD frame sheet
4
3
3-86
TAPTITE CUP B M2.6x10
Hook
Hook
Connector
Confidential