Second Side Cis Flat Cable/Second Side Cis Unit - Brother HL-J6000DW Service Manual

Inkjet mfc
Hide thumbs Also See for HL-J6000DW:
Table of Contents

Advertisement

9.21 Second Side CIS Flat Cable/Second Side CIS Unit

(1) Turn the ADF unit upside down.
(2) Remove the screw (TAPTITE CUP B M3x10) from the Exit support plate.
(3) Slightly flip the Document sponge which is fixed with double-sided adhesive tape
and remove the Exit support plate from the ADF unit.
Note: When you flip the Document sponge, be careful not to crease and/or stain the
Document sponge.
TAPTITE CUP B M3x10
Document sponge
(4) Turn the ADF unit right side up.
(5) Remove the two screws (TAPTITE CUP B M3x10) from the Lower doc chute
ASSY.
Exit support plate
3b
ADF unit
Fig. 3-65
TAPTITE CUP B M3x10
Fig. 3-66
3a
Lower doc chute ASSY
3-71
Confidential

Advertisement

Table of Contents
loading

Table of Contents