Brother HL-J6000DW Service Manual page 252

(10)Remove the two screws (SCREW BIND M3x6) and remove the Motor plate from
the CR frame ASSY.
(11)Remove the two screws (SCREW BIND M3x6) and remove the Carriage motor
from the Motor plate.
Assembling Note: Assemble the carriage motor in a way that the print section comes
to the position shown in the figure.
CR frame ASSY
Routing of harnesses: See
SCREW BIND M3x6
10
11
Carriage motor
Fig. 3-152
11
" Lower cover R",
3-120
SCREW BIND M3x6
Print section
16
" Ink refill ASSY".
Motor plate
Confidential