Panel Flat Cable - Brother MFC-J5335DW Service Manual

(7) Remove the Flat core from the Lower cover and pull out the Panel flat cable from
the Flat core.
(8) Remove the two screws (TAPTITE CUP B M3x10).
(9) Release the Hook and remove the Tilt cover from the Lower cover.
Hook
(10)Tilt the Control panel ASSY in the direction of the arrow.
(11)Push the Tilt ratch in the direction of the arrow until clicks.
Note: Since grease is applied to the Tilt ratch, be careful not to get smeared with the
grease when pushing the Tilt ratch in.
Tilt ratch
TAPTITE CUP B M3x10
Fig. 3-65
A view
11
<A view>
Fig. 3-66
3-70
Tilt cover
Flat core
9
7b
7a
10
11
Tilt ratch

Panel flat cable

Lower cover
Control panel ASSY
Confidential