Switchback Sensor Pcb - Brother HL-J6000DW Service Manual

9.45 Switchback Sensor PCB

(1) Release the wiring of the harnesses attached to the Tube support plate.
(2) Release the seven Hooks and remove the Tube support plate from the Main body.
Tube support plate
Hook
Main body
(3) Release the wiring of the switchback sensor harness.
(4) Release the two Hooks and remove the Switchback sensor PCB from the Main
body.
Routing of harnesses: See
Hooks
Hook
Switchback sensor PCB
Main body
7
" Lower cover
Hook
Fig. 3-145
Hooks
Fig. 3-146
9
L", " Switchback sensor
3-116
Hooks
Switchback
sensor PCB
Hooks
PCB".
Confidential