Brother HL-J6000DW Service Manual page 52

Error
Code
2A00 No black ink cartridge loaded.
- Detected by the ink cartridge detection sensor.
2A01 No yellow ink cartridge loaded.
- Detected by the ink cartridge detection sensor.
2A02 No cyan ink cartridge loaded.
- Detected by the ink cartridge detection sensor.
2A03 No magenta ink cartridge loaded.
- Detected by the ink cartridge detection sensor.
2B00 Black ink cartridge ink remaining counter error
2B01 Yellow ink cartridge ink remaining counter error
2B02 Cyan ink cartridge ink remaining counter error
2B03 Magenta ink cartridge ink remaining counter error
2E00 Cannot communicate with ink cartridge IC chip (machine body side.)
2F00 Ink cartridge cover sensor detects opened cover state.
3000 Carriage does not move.
- Detected by the CR encoder sensor.
3100 Carriage cannot detect origin.
- Detected by the CR encoder sensor.
3200 Head capping is unable.
3500 Abnormal stop of head/carriage unit being driven
- Causes other than paper jam when ink is not discharging
3800 Abnormal stop of head/carriage unit being driven
- Caused by paper jam when ink is not discharging
3B00 Abnormal stop of head/carriage unit being driven
- Causes other than paper jam when ink is discharging
3C00 Abnormal stop of head/carriage unit being driven
- Caused by paper jam when ink is discharging
3E00 Defective occurs in the ASF motor, carriage motor or paper feed motor.
3F00 Carriage motor cannot stop.
4000 Casing internal thermistor defective
- Casing internal thermistor detects -20 degree-C or less, or 80 degree-C
or more when power is ON.
4200 Head voltage does not turn OFF.
4300 Head thermistor defective
- Head thermistor detects -20 degree-C or less, or 80 degree-C or more
when power is ON.
4400
Head driver IC detects abnormal temperature during operation or stand-by.
4600 Purge count or flushing count overflown.
4800 Head flat cable detected to be not correctly inserted.
4900 Head voltage does not raise.
4C00 ASIC thermistor error
- The ASIC thermistor detected a temperature of -21 degree-C or less, or
125 degree-C or greater, when the machine was turned on.
Contents
2-12
Refer to
page:
2-32
2-32
2-32
2-32
2-32
2-32
2-32
2-32
2-33
2-33
2-33
2-34
2-34
2-35
2-35
2-35
2-36
2-36
2-37
2-37
2-37
2-38
2-38
2-38
2-38
2-39
2-39
Confidential