Pf Encoder Sensor Pcb - Brother HL-J6000DW Service Manual

9.54 PF Encoder Sensor PCB

(1) Remove the two screws (SCREW BIND M3x6) and remove the Encoder cover
from the PF motor frame.
SCREW BIND M3x6
(2) Release the wiring of the PF encoder sensor harness.
(3) Remove the two screws (SCREW BIND M2x12) and remove the Encoder sensor
holder from the PF motor frame.
(4) Release the Hook and remove the PF encoder sensor PCB from the Encoder
sensor holder.
(5) Disconnect the PF encoder sensor harness from the PF encoder sensor PCB.
Encoder sensor holder
PF Encoder sensor PCB
SCREW BIND
M2x12
PF encoder sensor harness
PF motor frame
Encoder cover
Fig. 3-170
PF motor frame
3
Hook
5
Fig. 3-171
3-131 Confidential