Brother HL-J6000DW Service Manual page 237

(18)< Model with Lower tray only >
Remove the screw (TAPTITE BIND B M4x12) from the Lower cover and lift the
Maintenance unit and Lower cover slightly.
Maintenance unit
(19)Release the Hook and push down the lever of the ASF drive frame in the arrow
direction. Slide the Maintenance unit in the arrow direction and remove it from the
Lower cover.
Note: Be careful not to damage the lever of the ASF drive frame of the Maintenance
unit when removing it.
Lever of the ASF
drive frame
Maintenance unit
Hook
Maintenance unit
Fig. 3-126
A view
19a
<A view>
Fig. 3-127
3-105
TAPTITE BIND B M4x12
Lower cover
Lower tray unit
19b
Lever of the ASF drive frame
Lower cover
Confidential