Brother HL-J6000DW Service Manual page 234

(8) Release the two Hooks and release the Main PCB harness hold R from the Main
PCB frame.
Hooks
(9) Remove the screw (SCREW BIND M3x6) and remove the T2 FG wire and PF FG
wire from the Main PCB frame.
(10)Remove the screw (SCREW BIND M3x6) and remove the Engine FG wire from the
Main PCB frame.
(11)Remove the two screws (SCREW CUP M3x6 and TAPTITE CUP B M3x10) and
remove the Main PCB frame from the Main body.
TAPTITE CUP B M3x10
SCREW BIND M3x6
PF FG wire
T2 FG wire
SCREW BIND M3x6
Engine FG wire
Main PCB frame
Fig. 3-121
Main PCB frame
SCREW CUP M3x6
Fig. 3-122
3-102
Main PCB harness hold R
Lower cover
Main body
Confidential