3Rd Tray Paper Pull-In Sensor Pcb - Brother HL-J6000DW Service Manual

(3) Disconnect the five connectors from the 3rd tray relay PCB.
(4) Remove the two screws (TAPTITE CUP B M3x10) from the 3rd tray relay PCB.
(5) Remove the 3rd tray relay PCB from the 3rd tray unit.
TAPTITE CUP B M3x10
3rd tray relay PCB
3rd tray unit
Routing of harnesses: See

9.64 3rd Tray Paper Pull-in Sensor PCB

(1) Release one Lock and remove the 3rd tray paper pull-in sensor PCB from the 3rd
tray sensor holder ASSY.
(2) Release the 3rd tray paper pull-in sensor harness.
3rd tray paper pull-in sensor harness
Fig. 3-200
18
" 3rd tray relay PCB".
3rd tray paper pull-in sensor PCB
2
1b
1a
Fig. 3-201
3-148
Lock
3rd tray sensor holder ASSY
Confidential