Wireless Lan Pcb - Brother HL-J6000DW Service Manual

9.34 Wireless LAN PCB

(1) Remove the two screws (SCREW CUP M3x6) and remove the Main PCB shield
from the Main PCB.
(2) Disconnect all the Connectors of the harness attached to the Main PCB harness
hold L from the Main PCB.
3rd tray relay harness
Carriage motor
harness
ASF motor harness
PF motor harness
3rd tray paper feed
motor harness
Power supply harness
SCREW CUP M3x6
SCREW CUP M3x6
Main PCB
Fig. 3-107
T2 paper remaining sensor harness
PF encoder
sensor harness
Main PCB
Fig. 3-108
Main PCB shield
T2 detection sensor harness
T1 paper remaining sensor harness
Registration
sensor harness
3-95
T1 detection
sensor harness
Switchback
sensor
harness
Confidential