Second Side Cis Unit; Second Side Cis Flat Cable (Duplex Scanning Models Only) - Brother DCP-8110DN Service Manual

(3) Remove the two CIS spacers from both ends of the second side CIS unit.
(4) Peel the double-sided tape securing the second side CIS flat cable to the back of the
ADF unit.
Note:
• Once the double-sided tape is peeled from the second side CIS flat cable, replace
the tape with new tape.
(5) Lift the second side CIS unit to remove the second side CIS flat cable.
(6) Remove the two CIS springs from the ADF unit.
Double-sided tape
Assembling Note:
• Once the second side CIS flat cable is removed, it cannot be secured with the
securing fixtures unless the lower ADF chute is removed. Refer to the Assembling
Note in "9.9.12 Drive frame ASSY / Document feed roller ASSY 1"
second side CIS flat cable.
Second side CIS flat cable
ADF unit
Fig. 3-45
3-42
CIS spacer

Second side CIS unit

CIS spring
CIS spacer
CIS spring
to attach the
Confidential