Table of Contents
Advertisement
Installation Guide Linear Motors
For the purpose of complete encapsulation, the plug is welded to the motor housing. The connector on the
motor is made of stainless steel and has a thread for tightening. When plugged in, the protection class IP67
is fulfilled. The motor and cable connectors are screwed tightly together (tightening torque 5 Nm, WAF 27).
3.10 Motor cable
Cable type
Minimum bending radius for fixed installation
Minimum bending radius when moving
Approval
Material wire isolation
Material cable sheath
Oil resistance
Chemical resistance (to acids, alkalis, solvents,
hydraulic fluid)
Outdoor durability
Flammability
Ordering information
Item
KS10-EX-Y-Fe/E6k-
Item
MC01-Y-Fe/m
MC01-E6k/f-EX
KS10-05/05/04-EX
Page 26 / 47
Description
Trailing Chain Cable KS10-EX-Y-Fe/E6k-, Custom length
Description
Motor Connector Y-Fe/m
Connerctor with hexagonal union nut
Motor cable for EX applications per m
P01-48-HP EX protected
KS10-05/05/04-EX
High-Flex Cable
60 mm (2.36 in)
120 mm (4.72 in)
UL / CSA 300V
TPE
PUR
very good
good
very good
flame-retardant
Item-No.
0150-3642
Item-No.
0150-3289
0150-3538
0150-9010
NTI AG / LinMot
ENG
Advertisement
Table of Contents
