Table of Contents
Advertisement
Installation Guide Linear Motors
2.3 Additional ATEX safety instructions
Assembly, commissioning, and maintenance of the motors may be performed only by
qualified personnel who are familiar with the directives of DIN EN 60079-14.
Maintenance and service work may be performed only in a clean room with no explosive
atmosphere. Dangerous ignition sources may arise when disassembling component parts.
Only original parts from LinMot may be used for commissioning and maintenance work.
The stator is grounded via the motor cable. The connector must be firmly tightened.
Observe the specified tightening torque in chapter 3.9.
Do not separate when energized.
Operation is allowed only in conjunction with a temperature relay and circuit breaker.
Only for use with a LinMot inverter.
The permissible ambient temperature for operating the motor is 0 °C ... +60°C.
Page 8 / 47
P01-48-HP EX protected
ENG
NTI AG / LinMot
Advertisement
Table of Contents
