Table of Contents
Advertisement
Installation Guide Linear Motors
4 Motor Cable
Do not connect or disconnect motor when there is power on the servo drive.
Use only original LinMot cable. Cables from other sources must be checked precisely
before commissioning.
Incorrect connections can destroy the drive and stator.
4.1 Technical Data
The motor series P10-54 use various types of cables, which are used for power supply and signal power. All
cables are high-flex cables (suitable for trailing chains) and are used for fixed and moving applications.
Type
Used for
Minimum bending
radius for fixed
installation
Minimum bending
radius when moving
Max. Cable length
Approval
Material
Oil resistance
Chemical resistance
(to acids, alkalis,
solvents, hydraulic
fluid)
Outdoor durability
Flammability
Page 14 / 32
Power cable
KPS07-04/02
PS10-54
PS10-54-D2x
70 mm
(2.76 in)
140 mm
(5.52 in)
No torsion
30 m (may be limited by Servo Drive)
UL / CSA 1000V / 300V
Wire isolation: PES
Jacket: PUR
very good
good
very good
flame retardant
P10-54 / P10-54-D24/25/25S
Sensor cable
KSS05-02/08
PS10-54
45 mm
(1.75)
90 mm
(3.54 in)
No torsion
UL / CSA 300V
Wire isolation: TPE
Jacket: Special TPU
very good
good
very good
flame retardant
ENG
KSS05-02/13
PS10-54-D2x
45 mm
(1.75)
90 mm
(3.54 in)
No torsion
UL / CSA 300V
Wire isolation: PE
Jacket: PUR
very good
good
very good
flame retardant
NTI AG / LinMot
Advertisement
Table of Contents
