2=Zone Setup; Enable - ADT Unimode 9600 Installation And Operating Instruction

PROGRAMMING
1=POINT

2=ZONE SETUP

3=LOOP SETUP
Programming Screen #2
ZONE SETUP

1=ENABLE

2=DISABLE
3=ZONE 97 98 99
Zone Setup Screen #1
3.6.2 Zone Setup
Pressing 2 while viewing Programming Screen #2 will access the Zone Setup screens as
illustrated below:
@@@@ZONE@SETUP
1=ENABLE
2=DISABLE
3=ZONE@97@98@99
@@@@ZONE@SETUP
1=ZONES@INSTALLED
2=ZONES@ENABLED
3=ZONES@DISABLED
@@@@ZONE@SETUP
1=ZONE@TYPES
3.6.2.1 Enable
Pressing 1 for Enable, while viewing Zone Setup Screen #1, will display the following
screen:
@@ZONE@TO@ENABLE
Z
Zone Setup Screen #1
Zone Setup Screen #2
Zone Setup Screen #3
Enable Screen