Advertisement
Quick Links
Setting Up the EPP
Press the PAIRING button
1
for 5 seconds.
5 "
Press the button.
3
The EPP in Action
Panic Button
The EPP blinks
red
when the panic
button is pressed or a fall is detected
ADT MASTER LICENCES
NSW No. 406336543 VIC No. 652-156-12S, 652-156-91S WA No. SA61998 SA No. ISL 149773 ACT No. 17501831 QLD No. 40506
For more information, see:
www.adtsecurity.com.au/home-assure
Phone 131 005
Move the EPP at least
2
50 cm (20 in.) away
from the Control
Panel.
50 cm (20 in.)
The panel beeps and the
EMERGENCY button blinks
blue.
Blue
Monitoring Station
The EPP lights
green
when
the battery is replaced
Home Assure
Control Panel and EPP Kit
Getting Started
The Best Location for the Control Panel
Good cellular
Convenient for
reception
resident to access
PERS
Where speakerphone
can be heard throughout
premises
Advertisement
Related Manuals for ADT Home Assure
Summary of Contents for ADT Home Assure
- Page 1 Setting Up the EPP PERS Press the PAIRING button Move the EPP at least for 5 seconds. 50 cm (20 in.) away Home Assure from the Control Panel. 5 " Control Panel and EPP Kit 50 cm (20 in.) Press the button.
- Page 2 Setting Up the Control Panel Using the Control Panel Press to cancel an Place thumb emergency call in oval hold Check SIM and lift off the is inserted or cover insert Press to start an emergency call. Red light: ● Blinking: alarm in progress ●...
Need help?
Do you have a question about the Home Assure and is the answer not in the manual?
Questions and answers