ADT DSC 1832 Quick Manual

Table of Contents

Download this manual

Quick Guide:

For a detailed review of the entire system, please view the

Arm and Disarm

Arm:

To arm all sensors in AWAY mode when you are leaving the premises, press and hold the [AWAY]



button.

To arm in STAY mode when you are not leaving the premises, press and hold the [STAY] button OR



enter your [security code] and do not leave the premises.

To Quick Arm, press [*] + [0]. To enable or disable the Quick Arm feature on your device, enter [*] +



[9] + [Master Code] + [4].

Disarm:

To disarm, enter your [security code].



The DSC 1832 operates on a

Loss of AC power and use of backup battery power is indicated by NO AC.

DSC 1832

UB 1270

battery.

DSC 1832 system

manual.

Table of Contents

Do you have a question about the DSC 1832 and is the answer not in the manual?

Page 1  [9] + [Master Code] + [4]. Disarm: To disarm, enter your [security code].  Battery The DSC 1832 operates on a UB 1270 battery. Loss of AC power and use of backup battery power is indicated by NO AC.
Page 2 A low battery condition is indicated by BAT. For instructions on replacing your battery, please visit our Battery Replacement page. Bypassing Protected Areas Bypassing a zone allows you to arm your system with certain protected areas intentionally unarmed or to access a protected area when the system is armed.
Page 3 Security Codes You can program additional user codes and attributes. Additional users will be restricted to arming and disarming functions, while the Master user code can perform all functions. To program a new user, press [*] + [5] + [Master security code]. ...
Page 4 Volume The volume on the DSC 1832 is not adjustable.