Features and Options
Unimode 9600 PN 51336:C 11/06/01
•
Annunciators:
✓ ADT-AFM-LED Zone Annunciator Series
✓ ADT-LDM Graphic Annunciator Series
✓ ADT-LCD-80F Liquid Crystal Display point annunciator
✓ ADT-ACM-8R Relay Module
•
Silence inhibit timer option per NAC
•
Autosilence timer option per NAC
•
Continuous, March Time, Temporal or California code for main circuit board NACs
with two-stage capability
•
Selectable strobe synchronization per NAC
•
Remote Acknowledge, Alarm Silence, Reset and Drill via addressable modules,
ADT-AFM annunciators or ADT-LCD-80F Remote annunciator
•
Auto-program (learn mode) reduces installation time. Reports two devices set to
the same address
•
Password and key-protected nonvolatile memory
•
User programmable password
•
Fully programmable from local keypad or keyboard or local PC
•
SLC operates up to 10,000 ft. (3,000 m) with twisted, shielded wire or 3,000 ft (900
m) with untwisted, unshielded wire
•
Compatible with newer series devices (CLIP Mode)
✓ CP350: addressable Ionization Smoke Detector
✓ SD350(T): addressable Photo Smoke Detector (T= with Thermal Sensor)
✓ H350(R): Fast Response Heat Detector (R=Rate-of-Rise option)
✓ D350P(R): addressable Photo Duct Detector (R=alarm relay option)
✓ B501BH & B501BHT Sounder Bases
✓ BB224RB Relay Base
✓ BB224BI Isolator Base
✓ MMF-300: Monitor Module
✓ MDF-300: Dual Monitor Module (uses two consecutive SLC addresses)
✓ MMF-301: Miniature Monitor Module
✓ MMF-302: 2-wire Detector Module
✓ CMF-300: Control Module
✓ CRF-300: Relay Module
✓ ADT-BG-12LX: Manual Pull Station
✓ I300: Isolator Module
•
Compatible with legacy 300 Series devices (CLIP Mode only):
✓ CP300: addressable Ionization Smoke Detector
✓ SD300(T): addressable Photoelectric Smoke Detector (T= Thermal Sensor)
✓ C304: Control Module
✓ M300: Monitor Module
✓ M301: Miniature Monitor Module
✓ M302: 2-wire Detector Module
✓ ADT-BG-10LX: Manual Pull Station
•
Optional 4XTMF module (conventional reverse polarity/city box transmitter)
Product Description
13
Need help?
Do you have a question about the Unimode 9600 and is the answer not in the manual?
Questions and answers