Quick Stop Option Code (Obj. 605Ah)]; [Quick Stop Option Code (Obj. 605Ah: 00H)] - Mitsubishi Electric Melservo J5 Series User Manual

9.3

[Quick stop option code (Obj. 605Ah)]

[Quick stop option code (Obj. 605Ah: 00h)]

Data Type Access
I16 RW
Description
Set how to decelerate the servo motor to a stop at Quick Stop reception.
Setting value Description

0 (not supported)
1 (not supported)
2 In the cyclic synchronous positioning/velocity mode (csp/csv), profile positioning/velocity mode (pp/pv), and homing mode (hm), the
servo motor decelerates to a stop with [Quick stop deceleration (Obj. 6085h)] and the state shifts to "Switch On Disabled".
In the cyclic synchronous torque mode (cst), the profile torque mode (tq), and the continuous operation to torque control mode (ct), the
state immediately shifts to "Switch On Disabled" and the servo motor stops with the dynamic brake.
3 (not supported) 
4 (not supported)
5 (not supported)
6 (not supported)
7 (not supported)
8 (not supported)
9 PDS Control Objects
82
9.3 [Quick stop option code (Obj. 605Ah)]
Mapping Default
Impossible 2
Range Units

2 (fixed)
Save Parameter
Possible [Pr. PT68.0]