Removing The Endoscope; Adjusting The Image; Focusing The Image; Zooming - Atmos iQam Operating Instructions Manual

4.5

Adjusting the image

4.5.1

Focusing the image

1. Launch the software.
2. Turn the focusing ring.
4.5.2

Zooming

You need the ATMOS Capture Suite software to use this function.
1. Launch the software.
2. Zoom in on the live image display of the ATMOS Capture Suite software.
 Observe the operating instructions for the ATMOS Capture Suite software.
4.6

Recording videos

You need the ATMOS Capture Suite software to use this function.
Starting and stopping a recording
1. Launch the software.
2. In the software, select the appropriate mode for video recording.
3. Tap 2x on the status indicator. (You need the ATMOS Capture Suite software
to use this function.)
» The video recording starts.
» The status indicator lights up red.
» The camera vibrates 2x.
» A red dot appears on the monitor.
4.4.2

Removing the endoscope

1. Hold the endoscope firmly and turn the
release lever
1
» The endoscope is released from the
camera.
to the right.
1
13
Operation