Installieren der Software Install the Software USB-Stick einstecken Plug in the USB stick Starten „setup.exe“ Start “setup.exe” „Capture Suite“ installieren Install “Capture Suite“ Neustart Computer Restart the computer Der verwendete Computer muss der IEC 60950-1 entsprechen. The computer used must comply with IEC 60950-1.
Anschließen der Kamera Connect the Camera Kamera und Gerät mit Kabel Connect the camera and verbinden device with the cable LED leuchtet konstant in Blau LED is constantly lit in blue...
Starten der Software Launch the Software Patient auswählen Select the patient (Doppelklick) (double click) Software starten Start the software Live Bild iQam Live image iQam is displayed wird angezeigt...
Page 5
Anschließen des Endoskops Connect the Endoscope Connect endoscope and camera Endoskop und Kamera koppeln LED blinkt 1x grün LED flashes green once...
Page 6
Capture Suite Einzelbild- / Video-Moduswechsel Capture Suite Snapshot / Video Mode Change Wechsel zwischen Einzelbild- / Video- Change between snapshot / video mode Modus durch den Button in der Software by pressing the button in the software...
Page 7
Einzelbild- / Video-Aufnahme Snapshot / Video Recording Einzelbild- oder Videoaufnahme durch: Snapshot or video recording by: Doppeltap auf Kamerakopf tapping 2x on camera head oder Betätigung Fußschalter or activating the foot switch oder Button in der Software or pressing the software button LED blinkt 1x blau (Einzelbild) LED fl ashes blue once (snapshot) LED leuchtet rot (Video)
Need help?
Do you have a question about the iQam and is the answer not in the manual?
Questions and answers