4
Operation
4.1
Ambient conditions during operation
• Temperature:
• Relative humidity:
• Air pressure:
4.2
Switching on the device
1.
Remove the camera from the camera mount or from the shelf.
»
The camera turns on.
»
The camera vibrates 2x.
»
The status indicator lights up blue.
4.3
Switching off the device
1.
Secure the camera to the camera mount or place the camera on the shelf.
»
The camera goes into standby mode.
»
A note symbol appears momentarily on the monitor.
»
The status indicator lights up blue at regular intervals („breathing").
To disconnect the camera from the power supply, pull the camera cable plug.
4.4
Connecting and removing the endoscope
12
Operation
+10...+35 °C
20...80% air humidity without condensa-
tion
700...1060 hPa
4.4.1
Connecting the endoscope
1.
Launch the software.
2.
Push the eyepiece lens of the endoscope
straight into the endoscope coupler of the
camera.
»
The camera automatically selects the
appropriate settings for the endoscope.
»
The camera vibrates 2x.
»
The recognized endoscope profile appears
on the monitor.