1.4
Function
The ATMOS iQam is a camera for digitizing an endoscopic image. Via the en-
doscope coupler a medical endoscope can be fitted using only one hand; it is
detected automatically and the optimal camera settings are used. The camera
switches on automatically when moved or when the image changes and auto-
matically goes into standby mode after use. A status indicator on the camera
head and vibration indicate the operating status of the camera.
The endoscopic image is transferred to a PC and displayed on a monitor. When
using the ATMOS Capture Suite software, recordings can be documented as
a photos or videos. The ATMOS Capture Suite software also allows individual
camera settings.
1.5
Intended users
Doctors and medically trained personnel
1.6
Scope of delivery
ATMOS iQam with
camera cable
1.7
Transport and storage
Only transport the device in a shipping carton, that is padded and offers suffi-
cient protection.
If damage occurs during transport:
1.
Document and report damages in transit.
2.
Send the device to ATMOS; see chapter "6.3 Sending in the device" on page
22.
Ambient conditions for transport and storage:
• Temperature:
• Relative humidity:
• Air pressure:
ATMOS Software
Demo-Version;
Operating instructions
(USB stick)
−40...+80 °C
5...90% air humidity without condensation
700...1060 hPa
Quick Guide
7
Introduction