4
Operation
4.1
Ambient conditions during operation
• Temperature:
• Relative humidity:
• Air pressure:
4.2
Switching on the device
1.
Remove the camera from the camera mount or from the shelf.
»
The camera turns on.
»
The camera vibrates 2x.
»
The status indicator lights up blue.
4.3
Switching off the device
1.
Attach the camera to the camera mount or place the camera on the shelf.
»
The camera goes into standby mode.
»
A hint symbol appears momentarily on the monitor.
»
The status indicator lights up blue at regular intervals („Breathing").
To disconnect the camera from the power supply the plug of the camera
cable must be pulled.
4.4
Connecting and removing the endoscope
+10...+35 °C
20...80 % air humidity without condensa-
tion
700...1060 hPa
4.4.1
Connecting the endoscope
1.
Launch the software.
2.
Press the eyepiece lens of the endoscope
into the endoscope coupler of the camera.
»
The camera automatically selects the
appropriate settings for the endoscope.
»
The camera vibrates 2x.
»
The recognized endoscope profile appears
on the monitor.
13
Operation